A new smartphone cooling system!Wireless charging smartphone cooler [semiconductor cooling type / wireless charging / turbine blower design / Equipped with silent motor]

1.Using the latest cooling technology, rapid cooling in 3 seconds

2. Equipped with wireless charging function, realizing cooling while charging

3.MagSafe compatible, sticks to the back of your smartphone

4.Low noise with silent motor. I am not worried about the operation sound at all

There is also no ON/OFF button on the main unit.

When you attach it to your smartphone, the internal sensor reacts and the cooler operates automatically.

Since it has a wireless charging function, you can cool your smartphone while charging it.

It also supports MagSafe, so it sticks to the back of your smartphone and won't fall off.

Introducing the voices of customers who have actually used this product overseas.

In recent years, games that require large amounts of data processing have appeared one after another on smartphone terminals.

Even if you play those games for a short time, your phone will heat up quickly.

If you leave a hot smartphone unattended, various problems will occur.

Not only can it damage internal components over time, but it can also cause thermal distortion and slow readings.

That's where the wireless charging smartphone cooler comes in.

By cooling a machine that gets too hot with a cooler, you can stabilize the system and even contribute to extending the life of your smartphone.

You can also prevent the phenomenon that the charging speed of the MagSafe charger is suppressed due to heat generated during charging.

We have verified the effectiveness of the wireless charging smartphone cooler.

First, measure the surface temperature of the cooler for one minute.

Watch this video.

It started at 28°C and dropped to 1°C after 1 minute!

(With conventional products, it takes 3 minutes to achieve the same cooling effect.)

In addition, after 5 minutes of continuous operation, the temperature of the surface dropped steadily, and finally, condensation formed on the surface of the smartphone cooler!

Watch the video below.

Here is the data of actually using the smartphone continuously for 30 minutes after attaching it to the back of the smartphone.

As you can see, after using this product, I was able to keep the temperature at 25°C even after using my smartphone for 30 minutes.

Effective cooling is realized by three technologies: "semiconductor cooling system" + "multilayer cooling material use" + "turbine ventilation"!

①Semiconductor cooling system

Smartphone coolers are mainly cooled by fans.

It is the same principle as the fan used to cool the CPU of a personal computer.

In recent years, apart from fan cooling, semiconductor cooling technology has evolved.

In particular, cooling using a semiconductor called a Peltier element is used in various fields.

When electricity is passed through a semiconductor Peltier element, one side is "cooling" and the other side is "heating".

By using this state, it is possible to cause a heat transfer phenomenon that absorbs heat on the low temperature side and releases heat on the high temperature side.

(2) Use of multilayer cooling material

Simply using semiconductor cooling technology does not have enough cooling effect!

If you actually look inside the cooler, you'll see "multi-layered cooling materials" in front of and behind the semiconductor cooling system.

This structure makes the cooling effect more effective.

(3) Turbine blower

The heat absorbed from the cooler surface is quickly pushed out into the air by a turbine blower fan running at 5000 rpm.

As the smartphone game heats up and the development of sweaty hands increases, the heat tends to be filled even more,

Vents on all sides allow heat to be dissipated quickly.

Also, on the side, you can blow air 360 degrees.

Since it is small, quietness is also one of its selling points. The ultra-low noise design of only 20dB (decibel) does not interfere with games and videos.

When your phone gets hot, the battery drains faster.

If you use it while charging, it will get hotter and the charging efficiency will drop significantly.

With this wireless charging phone cooler, you can charge while cooling!

Whether you're watching videos or playing games, you'll have hours of fun on your phone!

Furthermore, the wireless charging function is capable of 15W fast charging, so it can be used comfortably as a wireless charger.

For example from a computer or USB

Of course, you can also supply power from a mobile battery.

More! You can also use it as a stand when watching videos!

Charges, cools, and stands.

It is already a product that can be said to kill three birds with one stone.

It also has an "automatic start/stop" function.

When the cooler is attached to the smartphone, the internal sensor responds and automatically starts, and when removed from the smartphone, it automatically stops.

Electricity wastage, fan idling, and device longevity.

In response to the question, "Can I use this smartphone cooler with an older smartphone or android?"

Don't worry! We offer a variety of attachment methods!

① For iPhone 12 or later

The main unit has a Magsafe function, so it can be adsorbed just right.

And the adsorption power is quite strong.

② iPhone 12 or earlier, or those who do not want to remove the phone case

You can use the attached grip.

However, the cooling effect may be reduced due to the presence of a smartphone case, so we recommend removing the case before use.

(3) Android or without wireless charging function

A metal sheet is also included.

You can stick it on the back of your smartphone and wear it snugly.

Caution: If you attach the metal sheet to a smartphone with wireless charging function, the wireless charging function will not work due to the metal effect.

Also, if you attach a metal sheet to the phone case, you will not be able to use the wireless charging function.

Can also be used on large tablets and iPads!

If you attach a metal sheet to the back, you can easily transform it into a tablet cooling cooler!

And also for game consoles such as Switch that tend to get hot!

If you put a metal sheet on the back, you can get a good cooling effect.

*The power adapter is not included, so please use the one you have.

*A download link for the instruction manual will be sent by email at a later date. (Paper instructions are not included.)

Scheduled general sales price 6,230 yen (tax included) per unit

Early February 2022 Release March 15, 2022 End Late March 2022 Production Start Mid-April 2022 Shipping to Japan Late April 2022 Delivery to supporters

*If there is a change in the schedule, we will promptly report it to everyone on the activity report and various SNS.

About Emu-One Inc.

Emu is the French word for emotion. One means one.

[Emu-One] contains the desire to deliver one impression to everyone.

For a better life for everyone, we deliver products that are still rare in Japan with excellent design, quality, and functionality, and enrich the lives of many people across cultures and borders. We will help you to do so.

Our staff with specialized knowledge in trade, logistics and manufacturing will provide you with sincere service.

Emu-one Co., Ltd. is the official distributor in Japan for wireless charging smartphone coolers.

Regarding the wireless charging smartphone cooler, we also provide replacement for initial defects, product warranty, and after-sales service after purchase, so please use it with confidence.

If you have any opinions or advice, please contact us at the following email address.

contact@emu-one.com

We will continue to develop and plan good products and introduce overseas products to Japan.

If you register your LINE account, you can receive the latest information! You can also contact us directly with your LINE account.

https://lin.ee/KDBNYFC

Q. What is MagSafe?

A. MagSafe is a "wireless charging system using magnets" developed by Apple. MagSafe can easily fix the main unit and the charger using the magnet embedded in the back of the iPhone 12 and later models, so you don't have to worry about it slipping. You can also charge while wearing special accessories such as MagSafe compatible protective cases and card cases.

Q. My phone is an iPhone 13, can I automatically pick it up?

A. The Phone13 is MagSafe compatible, so it can be automatically picked up.

It is more stable than general wireless chargers and sticks perfectly to your smartphone, so you don't have to worry about it slipping off.

However, if you attach a smartphone case, the suction power may be weakened, so it is recommended to use it without the case or use the included grip.

Q. Do I need batteries?

A. It is unnecessary because it can be powered by the included USB charging cord.

Q. I am using a smartphone that does not have a wireless charging function, can I use this product?

A. Yes, you can.

If you want to stick it to your smartphone, you can use it by attaching the included metal sheet to the surface of your smartphone or smartphone case.

You can also use the smartphone grip.

Q. If I use it for a long time, will my smartphone get wet due to condensation?

A. Since heat is generated while using a smartphone, it should be kept at 25 degrees or less, but please be assured that it will not be low enough to cause condensation.

Q. In the video, the phone was automatically spinning even if it wasn't attached to the back of the smartphone.Is that how it works?

A. In order to make it easier to measure the temperature, we set the cooler to test mode and automatically rotate the phone, but in normal mode it only works when it detects metal.

*A download link for the instruction manual will be sent by email at a later date. (Paper instructions are not included.)

*Shipping time may be delayed due to order status, supply status of materials used, manufacturing process circumstances, etc.

*Some designs may change.

*Please note that if the item cannot be delivered and is returned to us, you will be responsible for the re-delivery cost.