The thickness is within the allowable range
First of all, the impression attached to the arm is that in the Wena series, the clock part called "head" is the same as a general watch (it can be diverted), and this Wena 3 is the same as a normal watch.It is surprisingly comfortable to use.
If you turn the inside of your wrist toward you, the display on the buckle is lit, and you can see that it is a smartwatch, but when it is off, it is no longer known that it is a smartwatch.The concept of the WENA series, which wants to consolidate smartwatch functions on the band side and built all in the buckle on the band side, is completed.
バックル部分にすべて内蔵し、小型化も図られたことで、腕時計として自然に使えるSo, what are the concerns in the field of mounting, etc., who haven't used Wena 3 yet, or are the concerns at the stage right after starting to use?The first is the thickness of the buckle part of the Wena three body.The thickness of the buckle part of the WENA 3 body is about 9mm in measurement.I feel, "It's acceptable, but the one is thick."This depends on the user's watch history, so it cannot be said unconditionally, but if you have used it mainly on watches such as leather and nylon belt, the buckle part of Wena 3 will be thick.
As a trial, I measured the thickness of the buckle part of the wristwatch currently owned (the thickest part near the center of the wrist), but the NATO type strap (nylon belt) is 6mm, and the wena 3 is 9mm (heart rate sensor (heart rate sensor).Except for the part), the rubber belt of the diver's watch was 11mm.
バックル部分の厚さの比較。NATOタイプのストラップは6mm、wena 3が9mm、ダイバーズウォッチのラバーベルトは11mmだったFor example, if you usually use a metal band watch, you may not feel so uncomfortable even if you attach Wena 3.Watches and diver's watches based on tough structure tend to increase the thickness of the band, and the buckles inevitably become thicker.I used Omega's Sea Master in the past, but compared to the metal band buckle of such a watch, the thickness of Wena 3 is a familiar response.
However, even if you are familiar with your hand, for example, when hitting a personal computer keyboard, the left wrist is lifted with a buckle, and the point is a bit uncomfortable.This is a matter of getting used to, but if you haven't used a thick buckle watch, you'll need to keep in mind.
パソコンのキーボードを打つ際に、左手首だけバックルで持ち上がる。これまで厚みのあるバックルの腕時計を使ってこなかった人は、留意しておく必要があるだろうThe second concern is durability.It is no exaggeration to say that a wristwatch buckle is the most easily scratched part, especially if there are many desk work such as a personal computer.The wristwatch that I used on a daily basis was full and the buckle was full.Now, I think that the buckle is not "I don't want to hurt" but is "naturally full of scratches", but if it is a WENA 3 that is equipped with a display and mostly is a glass surface, the circumstances are a little different.come.
The Wena 3 display uses a coated Gorilla Glass for the surface glass, and has a certain level of consideration for damage.The outer stainless steel parts have a rib structure slightly increased from the display, and the display is less likely to be damaged when contacting a plane.Nevertheless, if the time of use is longer, it is expected that these stainless steel parts will eventually be full of scratches.
This is not the fault of the product, just like a general watch metal buckle, it is difficult to keep using it as shiny if you use it everyday.In addition, Miyabix has released a LCD protective film for Wena 3, so if you are worried, you may want to consider using such products.
